Model Number: LB-MFP20-#6236
Brand Name: Leadboom
Key Specifications/Special Features:
Fiber laser marker 20W for electronic components, PCB, hardware toolWhat is laser marking?"Laser marking" stands for marking or labeling of workpieces and materials with a laser beamIn this regard, different processes are distinguished, such as engraving, removing, staining, annealing and foamingDepending on the material and the quality requirement, each of these procedures has its own advantages and disadvantagesWhat materials can be marked with a laser?
- Metals:Stainless steel, aluminum, gold, silver, titanium, bronze, platinum or copper
- Plastics:ABS, polycarbonate, polyamide, PMMA or plastics with laser additives
- Paints
- Foils and films and packing
- Laminates
Depending on the material,different laser typesare used for laser markingBenefits of fiber laser marking
- High-precision marking at constant quality
Thanks to the high precision of laser marking, even very delicate graphics, 1-point fonts and very small geometries will turn out clearly legible At the same time, marking with the laser ensures constant high-quality results
Laser etching is permanent and at the same time resistant to abrasion, heat and acids Depending on the laser parameter settings, certain materials can also be marked without damaging the surface
Laser marking is one of the fastest marking processes available in the market This results in high productivity and cost benefits during manufacture Depending on the material structure and size, different laser sources or laser machines can be used to further increase the speed
- LeadboomLASER machines for laser marking
Leadboom LASER offers you a wide range of flatbed and galvo laser machines for marking a large variety of materials
Laser marking machine technical parameters
Type: LB-MF10LB-MF20LB-MF30
Power:10/20/30W
Beam quality: M2≤14M2≤18M2≤18
Marking speed: ≤7000, /s≤8000, /s≤8000mm/s
Power consumption: 05/08/12kW
Fiber laser: AO Q-switch pulse fiber laser
Wavelength: 1064nm
Laser marking software: EzCad21
Working area: 50x50-300x300mm
Minimum line width: 001mm
Repeated precision: ±0001mm
Min characters: 015mm
Cooling system: air-cooling
Location system: red dot indicator
Power supply: 220V AC /50Hz
Control system Ezcad motion control card-PC
Dynamic focusing device: yes
Dimension: 800 x 680 x 1200mm