220V Small Automatic Digital Melting Furnace JC-K-220-1

Product name:‍‍  220V Small Automatic Digital Melting Furnace
‍‍Model No.: JC-K-220-1 (220V 1000Watts)

Products Specifications:
Equipped with electronic temperature controls with digital displays, this digital melting furnace can reach a working temperature of 2102° F (1150 ° C). LED display with touchpad digital readout allows precision temperature control to 2102°F (1150°C) The digital temperature control will prevent overshoot and protect the heating element from overheating. Operated by a dial on the front of the control panel which is turned to the desired temperature. Temperature range is from 0 Degrees Fahrenheit to 2102 Degrees Fahrenheit (1150 Degrees Celsius) all digitally controlled by you.

The furnace is provided with a 30-oz graphite crucible and crucible tongs for pouring.

Digital Melting Furnace Instruction
Construction: consists of a cylindrical furnace, an insulated handle for easy pouring, and a temperature controller.
Heating: Heating elements surrounded working SIC chamber, which is no crack, no distortion.
Standard furnace package: 1x 1kg crucible,1xtongs,1xglove,1xglasses.
Electricity: Single-phase 220V 1000Watts,50Hz, different plug type connector can be available.
Construction: Access to crucible from top, manual cover closing.
Insulation: Multilayer insulation with double thickness of ceramic fiber layer.
Regulation: Digital PID temperature controller

Digital Melting Furnace Heating Elements

Digital Melting Furnace Operation Instruction
1.Using the tongs included with the furnace, grasp the crucible around the grooves in its upper sleeve (as shown).Carefully lower the crucible into the heating chamber and close the lid.
Warning! At this time, the heating chamber is extremely hot. Use caution and always wear heat-resistant gloves when performing any operation near the heating chamber. The temperature shown on the display will ramp down slightly
when you first add the crucible. It will return to your set-point temperature after a few minutes.  
2. Beginning with small pieces, slowly add metal to the crucible— fill the crucible only to 1/4–1/3 of its capacity at first. Once that is melted, add more metal until you have the amount needed for your casting.
Warning! Use caster’s tweezers to handle the metal pieces.
Do not drop larger, heavier pieces into the crucible as the shock could fracture it.
Please Note: We recommend using separate crucibles for different metals to avoid cross-contamination.
3. Grasp the handles at the back and side of the furnace, keeping your thumb on the lid tab to secure it. Pour smoothly and quickly into your mold; the metal will immediately begin to cool. If casting multiple flasks, repeat as needed.
Warning! Never tilt the furnace more than 90°; the crucible can slide out of the furnace spilling hot metal.Warning! Always wear appropriate heat-resistant safety gloves (such as the Kevlar® gloves) whenever you are handling a hot crucible.